Inflatable Arch with base sytem

Inflatable arch:

Before setting up, ensure that the stand is level and clean. If necessary, use a tarp to avoid coarse dirt on the starting arch. Place the two base systems at the desired location at a distance of 4 or 5 meters from each other and remove the covers. You should note that the base in which the fan is integrated is closest to the power source. Then take the target sheet advertising print out of the stuff sack and zip it onto the two bases. Unplug the power cable and make sure that all the zippers on the bow are properly closed again. After the cable has been connected to the socket, the advertising sheet is inflated by the permanent blower. If the advertising arch is filled with air, you can erect the arch. With a handle on the light switch located in the base, you can illuminate the advertising arch from the inside and thus perfectly set the scene for your evening or night event.

Is the inflatable arch only available in certain standard sizes?

Basically, the inflatable arch is available with 4 and 5 meter wingspan. Individual sizes can also be realized on special customer request.

Does the inflatable archway need to be powered all the time?

Yes. The arch is equipped with a permanent blower and must therefore be supplied with electricity for the entire service life.

How is the inflatable arch arch fixed?

The two bases on the legs ensure that the arch has a solid base. For outdoor use, however, the bow should also be secured with guy ropes.

How many people are required to set up the arch?

The inflatable arch can be set up by one person within a few minutes.

Can the advertising sheet be completely printed?

Yes, the price already includes full 4c digital printing.

Is the advertising print interchangeable?

Yes. The print is attached to the bases with a zipper and can therefore be replaced easily and inexpensively.

Can I illuminate the inflatable arch?

Yes. Both bases are equipped with cold light sources as standard and illuminate the arch from the inside.

Can I subsequently equip the bow with a goal wall?

An additional zipper must be sewn in during the production of the advertising print so that it is possible to zip in a goal wall. If you have to buy a goal wall, you should take this into account when purchasing the arch.