The inflatable advertising pillar is one of the highlights in the world of inflatable advertising products. The proven advertising pillar base system enables quick and easy assembly within a few seconds and guarantees maximum advertising effectiveness in the smallest of spaces. Setup and transport can be carried out effortlessly by one person, since both the blower and the standard lighting are integrated in the base. In conjunction with the zippable cover, a stable, space-saving transport box is created. The complete system is weatherproof and equipped with an exchangeable fully printed advertising cover. For unmistakable advertising appearances, there is the possibility of realizing individual forms of advertising pillars. Due to the different materials, special customer requests can be realized, making inflatable pillars a unique eye-catcher at every event.
from 3 pcs.: € 798,-
from 5 pcs.: € 777,-
larger quantities on request!
Polyamide fabric 220g / m²
water and dirt repellent coating
160 W / 220 V / internal
approx. 20 kg
1 person / < 1 minutes
included in the price, fully printed
Pillar incl. blower and lighting
fully printed advertising cover
Inflatable Pillar CLASSIC
Diameter: 60 cm
Height: 280 cm
Inflatable Pillar “Bottle” S
Diameter: 60 cm
Height: 280 cm
Inflatable Pillar CUSTOM
Height: according to customer requirements
Find the best possible location for the inflatable pillar in advance. It should be noted that the pillar permanently requires a power supply. Furthermore, a sufficient room height should be ensured. Once a suitable stand has been found, place the base there. Open the lid of the advertising pillar and take out the advertising print. Then open the zipper on the bottom of the print and pull out the power cable. Before you connect the cable to the socket, make sure that the zipper is closed again. As soon as the inflatable advertising pillar is connected to the electricity, it begins to inflate itself. During the inflation process, make sure that the advertising print is not too much on the floor and may become dirty.
Are there only certain standard sizes of inflatable advertising Pillars?
Like most of our products, advertising Pillars are manufactured individually according to customer requirements. Sizes that deviate from the standard dimensions can therefore be realized without problems.
Does the inflatable advertising pillar need to be continuously supplied with electricity?
Yes. This light pillar is equipped with a permanent blower and must therefore be supplied with electricity for the entire service life. Alternatively, we also offer the pillar pneumatically, i.e. without a permanent blower.
Can the inflatable advertising pillar be set up by one person alone?
Yes. The inflatable advertising pillar can be assembled by one person within a few seconds.
Can the inflatable pillar be transported by car?
Yes, the advertising pillar can be transported with any car without any problems. The advertising print can be completely stowed in the base.
Is the advertising print interchangeable?
Yes. The print is attached to the base with a zipper and can therefore be replaced easily and inexpensively.
Can you illuminate the inflatable pillar?
Yes. The base is equipped with a headlight as standard and thus illuminates the pillar from the inside.
Can you use the inflatable pillar even in the rain?
Yes, the advertising pillar can also be used in the rain. However, it is important that the advertising print is packed in the base only when dry.