4in1 Pneumatic Advertising Arch

Flexible Advertising Arch - individually printed!
4in1 Pneu Werbebogen

The classic archway has evolved and is now available in a unique 4in1 system. This revolutionary system guarantees the greatest possible flexibility at every conceivable event. The inflatable advertising arch can be reduced in span or used as a semi-arch. The removed bar can be used separately as a pneumatic advertising pillar. The 4in1 arch works without any permanent blower. Once inflated, it is dimensionally stable for many hours without additional air supply and can therefore be placed far from any power source. Each inflatable archway is individually made according to the customer’s ideas. The 4in1 Pneu advertising arch also convinces at evening and night events, since the optional internal lighting can optimally showcase the advertising arch.

  • Quick and easy setup
  • Can be dismantled into semi-arches and columns
  • Small pack size
  • Airtight core with pressure relief valve
  • Can be used for many years
  • Eye-catcher of every event
  • Pneumatic advertising media
  • Unique price / performance ratio
  • Inflatable starting arch, finishing arch, transit arch
  • Internal lighting possible
exkl. VAT.
exkl. freight costs
Inquire now

Specifications: 4in1 Pneumatic Advertising Arch

Air body

Thermoplastic Polyurethane (TPU): high wear, kink and tear resistance

Setup

2 people / <10 minutes

Print

Included in the price, fully printed

Optional

230V LED interior lighting
Electric pump
Metal weight plate
Hard base for beams / pillars
Alternate subject

Scope of delivery

Pneu archway
Printed cover
Transport bag

Dimensions: 4in1 Pneumatic Advertising Arch

4in1 Pneumatic Advertising Arch S:
Width (outside): 570 cm
Height (outside): 323 cm
Half arch: 170 x 323 cm
Beam / column: 230 cm
Diameter: 60 cm

4in1 Pneumatic Advertising Arch M:
Width (outside): 800 cm
Height (outside): 383 cm
Half arch: 223 x 383 cm
Beam / column: 354 cm
Diameter: 80 cm

4in1 Pneumatic Advertising Arch L:
Width (outside): 1000 cm
Height (outside): 483 cm
Half arch: 300 x 483 cm
Beam / column: 400 cm
Diameter: 96 cm

 

Further information: 4in1 Pneumatic Advertising Arch

4in1 Advertising Arch:

Before setting up, ensure that the stand is level and clean. If necessary, use a tarp to avoid coarse dirt or damage to the starting arch. Place the two bases at the desired location at the appropriate distance (depending on the size of the archway). Open the zipper (s) of the Pneu advertising arch, underneath is the air inlet and outlet valve (s) of the air body. Now connect the air inlet valve (s) to the hose of the air pump and inflate the air body to the full. Then you have to disconnect the hose of the air pump and close the valve (s) and the zipper (s) of the bow.

Is the 4in1 tire arch only available in certain standard sizes?

There are basically 3 standard sizes – however, larger sizes can also be customized.

 

Does the Pneu archway have to be supplied with electricity all the time?

No, once the archway has been set up, it does not require a permanent blower.

 

How is the inflatable arch arch fixed?

The two bases on the legs ensure that the arch has a solid base. For outdoor use, however, the base of the Pneu advertising arch should be weighted down with metal plates (optionally available). In addition, the bow must be fixed with guy ropes.

 

How many people are required to set up the Pneu archway?

The inflatable archway can be set up by two people within a few minutes.

 

Can the advertising sheet be completely printed?

Yes, the price already includes full 4c digital printing.

 

Is the advertising print interchangeable?

Yes. A change subject can be purchased separately.

 

Can you illuminate the Pneu archway?

Yes. An optional LED lighting can be integrated into the two bases.

 

 What combinations does the 4in1 Pneu advertising arch offer?

The arch can either be set up as a classic advertising sheet in two different sizes. Or as semi-arches. The bar that becomes free can then be used as an advertising column. A hard base is optionally available as a stand for this column.

 

How must inflatable / pneumatic advertising media be stored?

Advertising media must be dried before storage. Otherwise damage can occur which can no longer be repaired. (e.g. mold)

In addition, the temperatures during storage must not be permanently negative, as otherwise the materials used can become brittle.

Interested? Please contact us...

Contact

DWA OG - dieWerbearchitekten

Hauptstraße 9
4707 Schlüßlberg
AUSTRIA

+43 650 78 711 21

office@diewerbearchitekten.com