Elegant design, light structure and the ingenious construction of the Pop up MAGNETIC display guarantee a professional and individual advertising presence at exhibitions, press events or other events. The set only consists of an aluminum system, magnetic connecting rails, individually printed magnetic tracks and a solid transport case and is therefore ready for use in just a few minutes. In addition, the appearance can be adjusted at any time by exchanging the tracks equipped with magnetic tapes, which makes the magnetic display an absolute highlight in our product range.
It should be noted that various displays with a magnet system are offered on the market, which are often made of unstable systems or that the number of magnets may shift due to the small number of magnets. Our pop up magnetic display, on the other hand, consists of a high-quality, solid scissor grid system with completely screwed connections and extremely strong 10 mm double magnets.
from 3 pcs.: € 756,-
from 5 pcs.: € 668,-
from 3 pcs.: € 847,-
from 5 pcs.: € 745,-
from 3 pcs.: € 871,-
from 5 pcs.: € 845,-
larger quantities on request!
Aluminum scissor grid system
No-Lite 250 mic
Neodymium magnet technology
included in the price
Tabletop for hard case
Hard Case instead of Trolley Bag
Printed Panel for Hardcase
Magnet set for additional printed panels
Magnet set for rear paneling
Curved aluminum scissor system
Printed magnetic panels
Pop up Folding Display MAGNETIC 3×3
Visible dimension: 252 x 69 x 223,6 cm (L x B x H)
Graphic dimensions: 336 x 223,6 cm (5 panels each 67,2 x 223,6 cm)
Pop up Folding Display MAGNETIC 4×3
Visible dimension: 301 x 100 x 223,6 cm (L x B x H)
Graphic dimensions: 403,2 x 223,6 cm (6 panelsje each 67,2 x 223,6 cm)
Pop up Folding Display MAGNETIC 5×3
Visible dimension: 341 x 129 x 223,6 cm (L x B x H)
Graphic dimensions: 470,4 x 223,6 cm (7 panelsje each 67,2 x 223,6 cm)
Open the transport trolley and remove the scissor lattice system. Now unfold the scissor grid system of the magnetic wall completely and place it on a flat surface. Next, equip the scissor lattice system with the magnetic stripes so that vertical magnetic strips are created. Please note that the two outer sides of the back must also be equipped with these magnetic strips. Now the printed magnetic panels are placed one after the other on the vertical magnetic stripes. Then you can mount the lighting, which is located in the lid of the transport trolley, on top of the magnetic wall. If available, put the counter pressure all around the trolley and fix it with the Velcro. Together with the table top, the trolley then serves as a promotional counter. Please note that the magnetic wall is designed exclusively for indoor use and should therefore not be exposed to any wind.
What distinguishes the Pop up Magnetic display from exhibition walls from other manufacturers?
The Pop up Magnetic display consists of a very high-quality powder-coated scissor lattice system, in which all connections are screwed and not riveted. In addition, the advertising wall is equipped with strong neodymium magnets. The wall is therefore stable and does not wobble.
Can the construction of the Pop up Magnetic exhibition wall be carried out by a single person?
Yes, the structure is self-explanatory and can be done by one person without any problems.
Can I change the print paths if my logo changes, for example?
Yes. Replacement prints can be reproduced within a few days.
I want to place the wall in the middle of the room. Can I therefore also apply printing panels on the back?
Yes. We also offer printing webs for the back. The advertising wall is then completely printed all around.
What do I need to be able to use the transport trolley as a desk?
In order to be able to use the transport trolley of the Pop up Magnetic display as a desk, we optionally offer a table top and all-round printing for the trolley.
Can the Pop up Magnetic display also be used outdoors?
This exhibition wall is designed for indoor use and should therefore only be used there.
DWA OG - dieWerbearchitekten