Lightbox systems are now ubiquitous – and not without reason. Whether in showrooms, at trade fairs or in shopping centers, thanks to the frameless optics and the LED backlit subjects, they are far superior to conventional display systems and presentation systems. It can be set up in no time using plug-in connections. No other tools are required. The razor-sharp advertising subjects are attached to the frame with a rubber lip and can thus be exchanged quickly, easily and inexpensively. With the starter package, an advertising space measuring 200 x 248 or 200 x 298 cm can be created. However, since the BIGLEDUP advertising wall can be expanded modularly, a continuous advertising area of up to 300 x 248 or 500 x 298 cm can be set up using expansion sets. Furthermore, several advertising walls can be expanded as required using system connectors (straight, 90 °, T-shape, …) so that a complete exhibition stand can be set up. The starter package and the extension sets are each delivered in an ABS transport case, which means that the advertising wall can be transported without any problems. If LED backlighting is not desired, we offer the same system at a lower cost as BIGUP advertising wall.
silver anodized aluminum profile, 120 mm installation depth with cast aluminum connectors
simple, tool-free assembly thanks to the innovative plug-in system
Starting with a start module, frames can be expanded up to a size of 500 x 300 cm
Start module: 200 x 248 or 200 x 298 cm
Extension set A: 100 x 248 or 100 x 298 cm
Extension set B: 75 x 248 or 75 x 298 cm
Extension set C: 50 x 248 or 50 x 298 cm
Using system connectors made of metal, L, U, T, cross & star shapes are possible
BIGLEDUP advertising wall: LED lighting in the frame of contacts
BIGUP advertising wall: the same frame as BIGLEDUP, even without an LED module
OSRAM LED technology: homogeneous illumination on both sides thanks to the adapted lens shape
on request also on the opinion
TV holder for monitors (up to 10 kg), VESA 200 and 400 as an accessory
The starter module and each extension set are all packed in their own ABS hard switch case with a soft foam insert for protection
Aluminum frame system
Printed display fabric
Blockout fabric for backside
ABS hard shell transport case
Open the transport trolley and remove the feet from the advertising wall. These are attached to the underside of the frame by means of wing screws (without tools!). The frame sides are then inserted into the underside of the frame using a plug-in system, with the lighting cable of the side part being plugged into the socket on the underside of the frame. Furthermore, the other side parts of the frame and the top of the frame are plugged into one another analogously to the one just mentioned. Finally, the frame is stiffened by means of vertical or horizontal struts.
As soon as the frame has been put together, the printed advertising space is attached to the frame by means of a welt slide.
Can the BIGLEDUP advertising wall also be set up by inexperienced people?
In principle, this is already possible, as detailed assembly instructions are enclosed.
Is a transport bag included in the price?
Yes. An ABS hard shell transport case is integrated in the scope of delivery.
Can I exchange the advertising print on the BIGLEDUP advertising walls if, for example, my logo changes?
Yes. Advertising prints with a piping rail can be purchased individually at low cost.
I want to place the BIGLEDUP advertising wall in the middle of the room. Can I therefore also print the back individually?
Yes, on request you can also print the entire surface of the back. If printing on the back is not desired, a blockout material is attached to the frame by means of a piping slide.
Can several BIGLEDUP advertising walls be connected to one another?
Yes! As a single wall, the BIGLEDUP advertising wall is a unique display. However, several BIGLEDUP advertising walls can be combined to form long walls, L- or U-shapes. This modular system allows the creation of a complete exhibition stand.